Whelen Vendor Field Service Manuale Utente Scaricare il pdf (Pagina 2)

Page 2

Note - The following illustrations show a left Landing/Taxi light assembly to demonstrate the proper removal of a taxi light

reflector. This procedure is identical for the right side as well. Reverse this process for re-assembly.

Step 1 - Orient the assembly as shown. Rotate the lamp

assembly in a counter-clockwise direction.

DO NOT TOUCH

THE BULB’S GLASS ENVELOPE

WITH BARE HANDS!

Carefully remove the lamp assembly.

ARNING! Remove any grease or fingerprints from the

lamp glass envelope using a grease-free solvent such

as denatured alcohol or equivalent.

Step 3 - Obtain the correct reflector for the taxi light. When

properly oriented, the flat vertical reflector wall will be

positioned at the inboard end of the assembly and the lamp

opening will be aligned with the lamp mounting opening

in the assembly.

Step 2 - Locate, remove and retain the four (4) nuts, flat

washers and socket head bolts that secure the taxi reflector

to the assembly. Remove the taxi reflector from the

assembly.

Step 4 - Position the new reflector onto the assembly and

secure with the original hardware. Wipe the mirrored surface

of the installed reflector with a clean soft lint-free cloth to

remove any fingerprints or contaminants. Re-install the light

removed in step 1. Re-install completed assembly .

Taxi Light

Assembly

Manufactured Date Code

Taxi Light

Reflector

Taxi Light

Reflector

(correct orientation)

Inboard-end

of Assembly

Outboard-end

of Assembly

Flat Vertical

Reflector Wall

Taxi Lamp

Assembly

Landing Light

Assembly

1 2

Commenti su questo manuale

Nessun commento

Whelen Vendor Field Service Manuale Utente Pagina 2

Commenti su questo manuale

Prodotti e manuali riguardandi Apparecchiature per l'aria compressa Whelen Vendor Field Service